Pedestrian Barriers Bended Base

Metal Pedestrian Control Barrier, Galvanized Crowd Control Barrier

Crowd control barriers are also called crowd control fencing, removable barriers, pedestrian barricade, pedestrian barriers, portable fence, etc.

Temporary pedestrian barricade incorporates a specially designed locking system, that is both easy to use and very secure. The barriers are light and easy to handle while being strong and robust at the same time.

Applications: 
Sporting events, Concerts, Public Gatherings, Construction Sites, Any site and public restriction area.

Main markets: 
Australia, New Zealand, America, European countries, and Asia countries.

Surface treatment: 
(1). Pre hot dipped galvanized tube welded
(2). Fully hot dipped galvanized after welded
(3). Pre hot dipped galvanized tube welded and then polyester powder coated

1. AU and New Zealand Standard Specification:

Panel Size2200mm(L) x 1100mm(H)
Frame25mm O.D. 
Infill Pickets20mm O.D.
Spacing200mm (popular), 60mm, 100mm, 190mm
Surface
Treatment
(1). Pre hot dipped galvanized tube welded
(2). Fully hot dipped galvanized after welded
FeetFlat/detached Feet – removable, 
600x60x6mm, or as required


2. European Standard Specification:

Panel Size2300mm/2500mm (L) x 1100mm (H)
Frame38mm, 40mm
Infill Pickets16mm, 20mm, 25mm
Spacing125mm, 150mm, 200mm
FeetFlat/Cross/Bridge feet
Surface
Treatment
(1). Pre hot dipped galvanized tube welded
(2). Fully hot dipped galvanized after welded

Style 1 — American Standard Specification:

Height1170mm
Length9ft, 9.5ft
Square tubeSHS 20x20mm
Detached flat feet600x75x8mm
Surface treatmentHot dipped galvanized tube welded and then polyester powder coated
ColorWhite (popular), green, etc

Style 2
(A) Flat-style feet is the ideal choice at special events or venues that require funneling crowds or traffic in parallel lines.
Minimizes the tripping hazard and vehicle tires roll easily over the feet without damage the barricade.
The flat feet distribute weight evenly and rubber grommets provide added protection for sensitive floors.
Two holes in each foot allow it to be anchored to the ground.
(B) Cross-style feet:
Its feet are welded with the panel, so it’s more convenient to install.
Provides maximum stability for the barrier, thus making the product an ideal choice for use on grass, soft or uneven surfaces.
(C) Bridge-style feet design provides maximum stability for the barrier, thus making the product an ideal choice for use on grass, soft or uneven surfaces.
The Bridge Foot provides the best resistance to pushing by crowds, so if you are planning a parade, rally or concert, choose this for your sensitive crowd control needs.

Style 3
Powder- coated in green, with installed top and bottom barrier.
The biggest advantage for it is the height can be changed, you can use the higher and lower barriers according to your need.